Call 08048963562 76% Response Rate

our range

Self Supported Roofing System

Prominent & Leading Manufacturer from Pune, we offer proflex roofing system, curve roofing system and color coated warehouse shed.
  • Proflex Roofing System
  • Proflex Roofing System
  • Proflex Roofing System
  • Proflex Roofing System
  • Proflex Roofing System
  • Proflex Roofing System
  • Proflex Roofing System
Proflex Roofing System

Proflex Roofing System

Rs 110  / Square FeetGet Best Price

Minimum Order Quantity: 5000 Square Feet

Product Brochure

Thickness Of Sheet0.80 mm to 1.50 mm
MaterialAluminium
Surface TreatmentGalvalume
ColorWhite, Blue, Green, Orrange, Grey
BrandTATA
Coating Mass (GSM)AZ-150
Country of OriginMade in India

Rooflex System uses high quality, high grade, pre-coated Galvalume Steel as the basic Raw material. The panel forming and installation is a 100% on-site process. The Mobile panel forming Units( roll-forming/ panel fabrication equipment ) along with crane , seaming and other equipments are transported to project sites with required manpower, enabling panel forming & installation instantaneously. This nature of the process allows high-speed operations, bringing substantial benefits where time is a crucial factor. Precisely, the advantages of this new-age technology are many and favorable.

The raw-material, i.e., steel coils of the designed width, is fed into the Mobile panel forming Units. This Mobile panel forming Unit equipment forms profiled panels having the desired finished width, length and curvature, in two stages. The installation shall start from one end of the building, and moving along the length of the building, the process shall be completed. These panels are fixed to RCC gutter beam with Anchor bolts or with Nut Bolts in case of Steel Beams at both ends.

The roofing panels are installed over concrete/ steel gutter-beams (constructed by the client). The conceptual dimensional drawing of the required gutter-beams will be available to the customer from Rooflex System. The RCC/ steel sub-structure has to be designed considering the arch reaction data & load combinations given by ROOFLEX Roofing Solutions. It shall be within the purview of the Consulting Engineer to ensure the structure is designed to cater to the adverse load conditions.

Rooflex System Span Roof

Rooflex System Structure without trusses, purlins and ancillary support

Trusses, Purlins or any other kind of ancillary… None of these required to have Rooflex installed. K-Span Roofing System stands on it’s own up to 33 meter-spans, thus offering economy in both, time and energy.

Free from holes, nuts, bolts & overlaps

One of the strongest distinguishing features of our product is the mechanical system of panel connection which requires no holes, nuts, bolts, overlaps or sealants, adding on to the economy of costs.

 

Free from holes, nuts, bolts & overlaps

One of the strongest distinguishing features of our product is the mechanical system of panel connection which requires no holes, nuts, bolts, overlaps or sealants, adding on to the economy of costs.

Unobstructed 33 meters of clear spans

Our system is a stunning success when it comes to roofing for wider spans. A continuous roof of up to 33 meters at a streach can be easily and very effectivly covered with K-Span Roofing System. The technology derives these essence from it’s formation that makes it self supported to sustained external load factors without any steel structure and intermediate columns.

Material specification
Color Coated Galvalume base having tensile (Min. 350 TO 400 MPA Yield Strength) AZ 150 GSM, Al- Zinc

alloy Coating as per ASTM – A792 Grade D, 02/As1397 of Aluminum 55%, Zinc-43% & silicon -1.6%, RMP

Coating Top coat 18-22 microns & back coat 5-8 microns.

Material Make – M/s. Bhushan Power & Steel Ltd

 

Tolerance in TPT: +/- 0.02M, WIDTH: 914 MM, Tolerance: +/- 0.02 MM


    View Complete details

    get quote request a call back
    • Curve Roofing System
    • Curve Roofing System
    • Curve Roofing System
    • Curve Roofing System
    • Curve Roofing System
    Curve Roofing System

    Curve Roofing System

    Rs 110  / Square FeetGet Best Price

    Minimum Order Quantity: 5000 Square Feet

    Product Brochure

    Surface TreatmentColor Coated
    Thickness0.8mm To 1.60mm
    MaterialMild steel
    ColorAny Color
    BrandSwaraj
    Country of OriginMade in India
    Surface FinishingColor coated
    Usage/ApplicationIndustrial

    Swaraj Roofing Solutions has gained expertise in manufacturing and supplying a high- quality array of Structureless Roofing System. The range of Structureless Roofing System is acclaimed for durability and resistance to corruption. These roofing systems require solid sheets that are successfully used in a number of industries. Our team of skilled professionals meticulously oversee the designing process to guarantee the outstanding result of embossed solid sheets.

     

    Installation Process

    Structureless Roofing System uses high quality, high grade, pre-coated Galvalume Steel as the basic Raw material. The panel forming and installation is a 100% on-site process. The Mobile panel forming Units( roll-forming/ panel fabrication equipment ) along with crane , seaming and other equipments are transported to project sites with required manpower, enabling panel forming & installation instantaneously. This nature of the process allows high-speed operations, bringing substantial benefits where time is a crucial factor. Precisely, the advantages of this new-age technology are many and favorable.

    The raw-material, i.e., steel coils of the designed width, is fed into the Mobile panel forming Units. This Mobile panel forming Unit equipment forms profiled panels having the desired finished width, length and curvature, in two stages. The installation shall start from one end of the building, and moving along the length of the building, the process shall be completed. These panels are fixed to RCC gutter beam with Anchor bolts or with Nut Bolts in case of Steel Beams at both ends.

    The roofing panels are installed over concrete/ steel gutter-beams (constructed by the client). The conceptual dimensional drawing of the required gutter-beams will be available to the customer from Rooflex System. The RCC/ steel sub-structure has to be designed considering the arch reaction data & load combinations given by ROOFLEX Roofing Solutions. It shall be within the purview of the Consulting Engineer to ensure the structure is designed to cater to the adverse load conditions.

    Structureless Roofing System Span Roof

    Structureless Roofing System Structure without trusses, purlins and ancillary support

    Trusses, Purlins or any other kind of ancillary… None of these required to have Rooflex installed. Structureless Roofing System stands on it’s own up to 33 meter-spans, thus offering economy in both, time and energy.

    Free from holes, nuts, bolts & overlaps

    One of the strongest distinguishing features of our product is the mechanical system of panel connection which requires no holes, nuts, bolts, overlaps or sealants, adding on to the economy of costs.

     

    Free from holes, nuts, bolts & overlaps

    One of the strongest distinguishing features of our product is the mechanical system of panel connection which requires no holes, nuts, bolts, overlaps or sealants, adding on to the economy of costs.

    Unobstructed 33 meters of clear spans

    Our system is a stunning success when it comes to roofing for wider spans. A continuous roof of up to 33 meters at a streach can be easily and very effectivly covered with K-Span Roofing System. The technology derives these essence from it’s formation that makes it self supported to sustained external load factors without any steel structure and intermediate columns.

    Advantages
    • Structureless Roofing System structure without Trusses, Purlins or ancillary support
    • Aesthetically appealing
    • Unobstructed 4’; to 140’; feet of clear spans
    • 100% Leak proof
    • 0% Maintainance
    • Faster project turnaround
    • Free from Holes, nuts, bolts & Over laps
    • Value for money
    • No bird nuisance


    Additional Information:

    • Production Capacity: Per Day 5000 Square
    • Delivery Time: 45 Days

    View Complete details

    get quote request a call back
    • Proflex Roofing System
    • Proflex Roofing System
    • Proflex Roofing System
    • Proflex Roofing System
    • Proflex Roofing System
    • Proflex Roofing System
    Proflex Roofing System

    Proflex Roofing System

    Rs 110  / Square FeetGet Best Price

    Minimum Order Quantity: 5000 Square Feet

    Product Brochure

    MaterialSteel / Stainless Steel
    Surface TreatmentGalvalume
    Thickness Of Sheet0.60 mm
    ColorGrey
    Leak Proof100%
    Roofing SystemK-Span

    Proflex System Structure without trusses, purlins and ancillary support

    Trusses, Purlins or any other kind of ancillary… None of these required to have Rooflex installed. K-Span Roofing System stands on it’s own up to 33 meter-spans, thus offering economy in both, time and energy.

    Free from holes, nuts, bolts & overlaps

    One of the strongest distinguishing features of our product is the mechanical system of panel connection which requires no holes, nuts, bolts, overlaps or sealants, adding on to the economy of costs.

     

    Free from holes, nuts, bolts & overlaps

    One of the strongest distinguishing features of our product is the mechanical system of panel connection which requires no holes, nuts, bolts, overlaps or sealants, adding on to the economy of costs.

    Unobstructed 33 meters of clear spans

    Our system is a stunning success when it comes to roofing for wider spans. A continuous roof of up to 33 meters at a streach can be easily and very effectivly covered with K-Span Roofing System. The technology derives these essence from it’s formation that makes it self supported to sustained external load factors without any steel structure and intermediate columns.

    Advantages
    • Proflex System structure without Trusses, Purlins or ancillary support
    • Aesthetically appealing
    • Unobstructed 4’; to 140’; feet of clear spans
    • 100% Leak proof
    • 0% Maintainance
    • Faster project turnaround
    • Free from Holes, nuts, bolts & Over laps
    • Value for money
    • No bird nuisance
    • Instant installation of 10,000 sq in just 12 hours
    • Onsite fabrication and installation
    • Larger enclosed volumes
    • Cooler temperatures
    • Dedicated after sales support
    • Resistant to damage & Corrosion
    Use of these kinds of Roofs
    • Aircraft Hangers
    • Automobile Industries
    • Agricultural Warehouse
    • Bus Stations
    • Clean Rooms
    • Cold Storage
    • Defense Setups
    • Educational institutions
    • Engineering industries
    • Factories
    • Garages
    • Stadium/Auditorium
    • Garment Factories
    • GaragesAuditoriums
    • Stadium/Auditorium
    • Garment Factories
    • Parking Areas
    • Pharmaceutical Units
    • Sports Stadiums
    • Swimming Pools
    • Textile Industries
    • Warehouses
    • Recreation Parks
    • Restaurants
    • Shopping Malls
    • Malls Showrooms
    • Material specification
    • Color Coated Galvalume base having tensile (Min. 350 TO 400 MPA Yield Strength) AZ 150 GSM, Al- Zinc
    • alloy Coating as per ASTM – A792 Grade D, 02/As1397 of Aluminum 55%, Zinc-43% & silicon -1.6%, RMP
    • Coating Top coat 18-22 microns & back coat 5-8 microns.
    • Material Make – M/s. Bhushan Power & Steel Ltd
    • Tolerance in TPT: +/- 0.02M, WIDTH: 914 MM, Tolerance: +/- 0.02 MM


    Additional Information:

    • Production Capacity: Per Day 5000 Square Feet
    • Delivery Time: 45 Days

    View Complete details

    get quote request a call back
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    • Color Coated Warehouse Shed
    Color Coated Warehouse Shed

    Color Coated Warehouse Shed

    Rs 110  / Square FeetGet Best Price

    Minimum Order Quantity: 5000 Square Feet

    Product Brochure

    Built TypeModular
    Usage/ApplicationWarehouse
    BrandSwaraj
    Thickness0.8mm to 1.60mm
    MaterialMild steel
    Country of OriginMade in India
    Surface FinishingColor Coated
    Color Coated Warehouse Shed our company is indulged in providing wide range of Panel Built Warehouse Sheds . We make sure that the product is delivered at market leading prices. Panel Built Warehouse Sheds has become the preferred choice of the customers due to the superior quality, reliability and many more.


    Material specification

    Color Coated Galvalume base having tensile (Min. 350 TO 400 MPA Yield Strength) AZ 150 GSM, Al- Zincalloy Coating as per ASTM – A792 Grade D, 02/As1397 of Aluminum 55%, Zinc-43% & silicon -1.6%, RMPCoating Top coat 18-22 microns & back coat 5-8 microns.Material Make – M/s. Bhushan Power & Steel LtdTolerance in TPT: +/- 0.02M, WIDTH: 914 MM, Tolerance: +/- 0.02 MM

    Additional Information:

    • Production Capacity: Per Day 5000 Square Feet
    • Delivery Time: 45 Days

    View Complete details

    get quote request a call back

    EXPLORE MORE CATEGORIES